摘要
![工业废水行业现状分析 工业废水行业现状分析](//ziboxinyan.com/sgpjbg/images/nc365_2.jpg)
近些年来,在我国工业发展进入新时期的同时,工业废水同样受到了更大的关注。然而,工业废水目前仍存在较多问题,如降解效率低、污染物转移率高等,从而给环境造成严重污染并带来巨大的影响。因此,对于工业废水的分析和总结,显得尤为重要。本文就工业废水现状进行分析,包括工业废水排放量、污染特性和处理技术三个方面,并阐述目前存在的问题及相关建议。
关键词:工业废水、排放量、污染特性、处理技术
industrial wastewater,emission,pollution characteristics, treatment technologies
Industrial Wastewater Analysis and Summary
Abstract
In recent years, with the development of industry entering a new era, industrial wastewater has also attracted much attention. However, many issues still exist in the current situation of industrial wastewater, such as low biodegradation efficiency and high pollutant transfer rate, which has caused serious pollution to the environment and great impact. Therefore, the analysis and summary of industrial wastewater is of great importance. This paper will aim to analyze the current status of industrial wastewater, including the emission volume, pollutant characteristics and treatment technics, as well as discuss the existing problems and relative suggestions.
Keywords: industrial wastewater, emission, pollution characteristics, treatment technologies
一、工业废水排放量
经过多年的发展,我国工业废水排放量目前处于高位,统计数据表明,2018年我国全国经济总量达到14.39万亿元,出厂工业废水排放量为4.63亿立方米;2019年,我国经济总量继续保持快速增长,突破15万亿元,而出厂工业废水排放量达到4.74亿立方米,比2018年上升了1.9%。这一指标表明,工业废水排放量在增长,废水的管控压力也在不断加大。
二、污染特性
除工业废水排放量不断增加外,污染特性也是增加的重要原因。经分析发现,大多数的工业废水含有23种污染物以上,其中,有些会对环境造成重大污染,如高浓度化学品、酸、硫酸等,其水质特征会严重影响收敛池水质的正常排空,从而影响收获权益。此外,工业废水易受到重金属污染和水质改变的影响,影响到河流的水质,并且会产生污染物迁移转移,可能给河流、湖泊环境带来重大破坏。
三、工业废水处理技术
虽然目前存在上述问题,但近几年,我国在工业废水处理技术方面也有了巨大进步,以达到降低污染水平的要求。目前主流的工业废水处理技术有混凝和化学沉淀、膜法、活性炭吸附、曝气和湿法废水处理技术等。
其中,混凝是最常用的工业废水处理技术,它可以降解水中的高浓度有机物和底物,同时可以通过反洗或调整pH值来减少水中的污染物。化学沉淀在消除工业废水中铁、锌、铝、钛、铝等重金属元素方面有着显著的效果,而膜法由于具有较高的物料透过性,能有效的降低污染物,提高水质。后两种技术分别是活性炭吸附和曝气湿法废水处理技术,这两种技术均能有效的将水中的污染物降解,而且处理效率非常高,能够满足后端要求。
四、存在的问题及建议
从上述分析可以看出,我国工